Wizard Wand Holster Pouch

Harry Potter has been a big part of our family fun.. My kids love the books, the movies, and of course dressing up as their favorite characters for Halloween.

This post contains affiliate links to products I recommend. I do make a portion off any you may purchase. See full disclosure here.

Over the years, we've collected all kinds of "wizard gear" but the one thing my kids love most are their wands. The problem? Wand are fun to play with but can be really awkward to carry around.

That's where the Harry Potter wand holster comes in!

This simple sewing project makes it easy to keep wands safe while kids play at home or even while traveling. We used this pattern on our last trip to Florida to visit the Universal Studios parks and they worked great.

VIDEO: Wizard Wand Holder

-------

Easy sewing pattern for Harry Potter wand holster.

Harry Potter Wand Holster Tutorial

Materials Needed

(1) 19" x 4.5" - Main fabric
(1) 17" x 4.5"- Main fabric
(1) 19" x 4.5" - Lining fabric
(1) 17" x 4.5" - Lining fabric
5" x 1.5" - main fabric for loops
2" Hook and Loop Tape
(2) 2" Carabiners
Wizard Wands
Optional: 26-30" webbing
Optional: 2 keyrings
Optional: Fusible interfacing

Step 1

Fold the two long edges of the fabric loop piece 1/4" and press. Then fold the entire loop piece in half on the long side. Press and stitch.

Step 2

Fold the loop piece in half, matching short, raw edges and cut into two pieces. Set aside.

Step 3

Place the main fabric pieces and lining piece right side up on a flat surface. The two main pieces together and the lining pieces together.

Step 4

Place the smaller pieces over the longer pieces matching the short side.

Step 5

Take one of the loop pieces and fold it in half. Place it between the short sides of the main fabric pieces. Pin in place.

Stitch the short sides of the main fabric and the short side of the lining fabric.

Step 6

Open up the two pieces and press.

Match the lining and main fabric with right sides together. Make sure the longer pieces are lined up and the short side is lined up.

Stitch together the shorter of the two pieces (the 17" pieces).

Step 7

Press open the seam. Lay the pouch with right side up. Take ahold of the center seam and press it flat with wrong sides together.

Step 8

Place one side of the hook and loop tape on the main fabric side of the center seam you picked up. Stitch the hook and loop tape to those two (17") layers.

Fold the pouch at all the seams so that all of the right sides are touching. It should lay flat.

Step 9

Place the other loop piece between the two main fabric pieces close to the hook and loop tape and pin. Stitch around the entire bag. Leaving a 2" opening at the top edge of the 19" pieces.

Turn the bag right side out through the opening. Press.

Step 10

Press the top edge of the bag and topstitch the bag closed.

Step 11

Place the other side of the hook and loop tape to the inside top edge of the pouch. Stitch in place.

Finally, add the carabiners to both of the loops and you are ready to add your wand to your Harry Potter wand holster.

If you want to add your own strap, measure from the back of the users shoulder to their hip and add a couple inches. Cut the webbing to this length.

Burn the ends of the webbing and stitch them around a keyring or D ring. Do this to both sides of the webbing. Then attach the strap to the carabiners.

If your kids are Harry Potter fans like mine, the Harry Potter wand holster is a must-have project. It's simple, fun and keeps their wands safe and it is super easy to carry whether they're running around the yard or walking through the Wizarding World at Universal.